I think everyone has answered your question correctly so far. You can’t beat plywood for strength, but it is expensive. There are middle ground alternatives.

There is Medium Density Fibreboard (MDF) which is between the two on strength but takes paint brilliantly. Many cabinet makers use this exclusively for mid range quality furniture.

Even cheaper is chipboard which is about as bad, or worse than OSB but you can get it laminated. Most very cheap furniture from places like IKEA use it and it can do a reasonable job.

All of these materials have their quirks, mainly on how you finish end grain (even plywood). Both MDF and chipboard suck at taking a screw so you have to get special screws and use them carefully. Make sure you do some research, there’s plenty of YouTube videos on using the products.

What’s the speed of the road? I would personally join the road earlier so that I can manoeuvre across with the traffic, but if the road is super fast I’d probably pick A. That is unless right on red is permitted, then I’m not sure.

I honestly think this is the worst use case for a 3d printer. The part isn’t improved by printing. You can buy the part easily. The cost of modelling time and printing is more than the replacement. There’s a decent chance the replacement part would have arrived quicker than the print took… Sorry to be a bore, it’s better than an octopus or another benchy, I’ll give you that.

You may have uploaded the wrong image again!

That car being driverless could have saved their life.

Oh, is this a poke at the Disney copyright expiring?

The article doesn’t say what happened. Without more information, the outcome could be fair. Arbitrarily putting people in prison for an accident isn’t going to solve anything.

Nice

It’s not just weight but friction. Depending on the flooring you could add a rubber pad to the bottom of the piece to help. If you do go the cavity route, steel washers are pretty cheap and would be heavy, or as someone else suggested, some lead weights will work.

Uhh… Conspiracy theory confirmed?

For every self help group there are hundreds of forums for hate speech. For every open, sane discussion there are hundreds of discussions that are railroaded by trolls. I agree that a transparent state is brilliant, but the reason for transparency is accountability and the individual needs to have that accountability also.

So few people care about this that it’s never going to stop. There are far more negatives to be solved by reducing anonymity than the positives of keeping a semblance of privacy.

China accounts for 30% of global emissions and, granted the states is half that, but they are still number 2. Also, the per capita number suggest that it would be easier for the individual to make a difference in the states.

Arguably a lot of China’s emissions come from industry. As America has outsourced a lot of it’s Industry to places like China these emission stats are probably somewhat warped.

https://www.worldometers.info/co2-emissions/co2-emissions-by-country

Nice, how different does it sound to a modern one?

I saw a tip for paint recently that I haven’t tried yet, but it might work here too. If you get some painters tape and make a V over the top it acts as a spout and it never gets on the threads

Link to image

You should have inverted his colours. Lol

I have 4 of these. Two of them are the ones that have integrated water catchers and only overflow if they are overwatered. One I’ve put a saucer in with the pot and one I just have to put a towel under it. I’d say the best option is the one with a saucer, you can visibly see that it’s flowed through, you can add gravel to improve humidity.

A quick search for 2 channel 24v fan controller yealded the below link. Not saying this is ideal for your scenario but something similar will work and can be powered with a power brick. Doesn’t look like it comes with instructions though so I’m not sure what current it requires. The temperature sensor could work to make it turn on when the printer heats up as well.

https://www.amazon.co.uk/Channel-Temperature-Controller-Governor-Display/dp/B083R97GZ1

Because they didn’t actually live in caves that often.

The image of these people living in caves arises from the fact that caves are where the preponderance of artifacts have been found from European Stone Age cultures. However, this most likely reflects the degree of preservation that caves provide over the millennia, rather than an indication of them being a typical form of shelter. Until the last glacial period, the great majority of humans did not live in caves, as nomadic hunter-gatherer tribes lived in a variety of temporary structures, such as tents[4] and wooden huts (e.g., at Ohalo). A few genuine cave dwellings did exist, however, such as at Mount Carmel in Israel.>

Wikipedia - Caveman

I think it’s all education. If people understand that credential managers are easier and safer then there would be a lot more uptake.