At almost 8pm local time, so yeah solar might not contribute much, but still that’s a lot of coal for early evening

It hit the stable channel this week, so fairly recent (unless you’re on the beta os)

Didn’t read this particular article, but using a pi as a router works rather well. I’ve been using one as my main router for years now, with openwrt. You get a CPU fast enough to handle QoS without issues, more than enough power to run a few additional things if you want to (wireguard, AdBlock, …). Only thing is : the wifi is trash. Doesn’t matter for me (I just use the integrated wifi for a guest network, main network have dedicated APs)

Clean the printing surface with dish soap and tepid water, and adjust your z offset. It appears to be too low from what I can see, but it’s hard to tell from a few pictures. It’s not supposed to be 0, and will depend on your specific printer, extruder, … You should aim to have fully filled squares, with no apparent “scars” on the surface left by the hotend moves. A nice rule of thumb is to be able to barely move a sheet of paper between your plate and the hotend freely without feeling friction (make sure to clean the tip of the hotend before). If after these steps it still produces these results, maybe there is an issue with you bed planarity, but most likely your pla has gone bad (I’ve even seen sealed bags go bad over a few years), try with a freshly dried filament, or a new roll from a reputable source

It really depends on your end goal I would say.

With a “bare” arch install you will probably learn the most (possibly the hard way). Also, arch being a rolling release, be prepared to update your system a lot, and fix problems as you go. That being said, I’ve been using the same arch install for a few years now and have had to fix stuff only once (Nvidia drivers, the usual culprit). If you want to try bleeding edge stuff, that would probably be the best option.

Nixos : same as you, tried, and left because the community couldn’t settle, and seemed to be fragmenting more and more. Also cool for bleeding edge stuff (thanks to the easy rollback)

You could also go for a debian based distro (debian or Ubuntu). My servers run on this, simply because they tend to require less maintenance.

There are also quite a few “docker-centric” distros, that can also be an option.

Whichever option you choose, if you use a lot of containers, mane sure to use something like docker compose, and keep your compose files safely somewhere (a git repository, a backup’d nas, …). You will keep a lot of nixos’s workflow goodness (everything is a config file), without some of the trouble.

IIRC zip can, but doesn’t by default. Source : wasted 8 hours trying to figure out why something didn’t work anymore (had to switch from tar to zip because stupid security system wouldn’t let me transfer the tar file)

Random idea that might work: Try to install ReFind from windows, it should work and allow you to boot from random thing more easily. Then try using it to boot from the SD card. Don’t forget to turn off secure boot. If that doesn’t work, the right idea is indeed to “burn” the media on a partition, however you will also encounter some amount of headache with this option: an installer is not a single partition, but multiple ones. You could try only having the “main” partition on disk, and use refind to boot it too.

TL;DR: ReFind could help you. Turn off secure boot.

Let my add a bit of love for the wurlitzer too :)

Not only this, but AFAIK grapheneos allowing you to block this permission is one of the main reasons why google refuses to “certify” the os for some things (like GPay).

Can confirm, in my head op’s post meant : “I replaced some old appliance with something quite standard that won’t bother me for years”. The fizzing is just replaced with the warmth of undisturbed uptime after about 4-5 years

Most actual poisoning techniques don’t actually work that well. When I end up with a PDF, I usually strip out the existing text layer, apply a denoiser and a few other preprocessing steps to correct common errors, then a layout / reading order detector, and finally OCR the different blocs. This is against the most common poisoning techniques, and one of the most efficient, called : someone printed a document, forgot about it for 3 years, then scanned it slightly tilted (and dirty, crumpled, …), and the scanner decided to apply its crappy OCR.

Using screenshots of the PDF also avoid any kind of font face poisoning, and anti copy protection.

If you really, really need to protect your PDF, please consider accessibility first, then what would work imho is to use the scripting features of pdf to actually render your content on the fly. That would probably mess up most of the “automatic” processes.

Ça m’intéresse aussi ! Pour l’instant le mieux que j’ai trouvé c’est chez selectspecs, prendre une paire “pas cher” et récupérer les verres. Sinon il me semble qu’ils peuvent faire la découpe+ assemblage, mais pas sûr qu’ils prendraient un cadre imprimé.

Si qqn trouve mieux, je suis preneur

I live in an area which has seen quite a few wildfires, and everytime they are put out with these planes using sea water. Never stopped anything from growing back, and it does grow back very fast !

A bit on the “easier” side of souls likes, but grime is worth a check. It’s quite regularly on sale / in bundles, and is similar in “vibe” to hollow knight.

Also, not for everyone, but salt and sanctuary can also qualify.

In the “3d” realm, most of you will probably already know it, but lies of P is really good !

For some reasons, there are now two models settings pages. One in the workspace, and another one in the admin settings (the old one was moved here). The feature you are looking for was probably just moved in the admin settings page

I went the /e/os way and quickly turned back. Not to dismiss the effort of the maintainers, but it really felt like a frontend on lineage os meant to sell alternative cloud services. I did not find convincing arguments over a bare lineage os and the pretty much forced /e/ cloud was a total turn off.

I went the “real” security / privacy way and switched to grapheneos. Very happy overall, already went thought with 2 major os updates, no issues whatsoever. Only issue would be if you want Google pay (won’t work on graphene). You’d need a pixel phone if that’s in your budget. The pixel phones are great at photos, but pretty “meh” otherwise

I’ve not used it for quite a bit, but look at Thunderbird (a mozilla project iirc), it might do what you want as far as email is concerned. However do note that Microsoft is really closing things down in outlook/office these days, they really don’t like people using a “real” Linux (they want people to use windows with all their crap and start menu ads, and just have a small Linux VM they call the wsl )

The massive influx of new ratings could also simply be linked to the fact that the game is included in this month’s humble choice, adding a ton of new players

It is also a huge deal because since (at least in France) the government forced ISPs to log DNS queries, a lot of browsers (and latest android and iOSversion’s) have now migrated to DNS over https or TLS DNS, which means that the only clear text DNS query they can intercept is the one to fetch your secure DNS service address. Now, having a trusted CA installed in browsers means that they can also spoof the identity of this secure name service, and regain a bit of control.

They invested a lot in surveillance technology (for both good and bad reasons), and https, DNS and encrypted messaging / phone calls means this was all for nothing.

And yes, by being authorized as a trusted CA, you can effectively spoof pretty much anything by setting a proxy. Some tools even leverage this for app analysis. Look up mitmproxy for example, or squid. A lot of companies already do this to inspect inbound / outbound traffic.

I’ve seen this news published at a few different places, and IIRC they plan to use already existing exploits. You can read a bunch about what could potentially be used on the grapheneos website, specifically on how the modem and cellular network stack is very highly privileged on android at least, and it is very likely that most cellphones are vulnerable to some kind of code injection via a stingray, for example.