I’ve heard that WDS is the standard for creating a wireless bridge, but I have since read on a number of forum posts that WDS shouldn’t be used anymore. This idea of it being deprecated seems to make sense, as it appears that it is not supported by another newer router that I have (tp-link Archer AX73). How should I go about this?
Removed by mod
see if your router can support OpenWRT
I have an Archer C7, to which I have already flashed OpenWRT.
avoid any routers with Broadcom or Qualcomm
Noted! I assume that the Archer C7 is an exception to that? It has a Qualcomm chip afaik. But, yeah, the AX73 is Broadcom.
Use the AX73 as your primary and the OpenWRT one as the repeater node and you’re set.
Is that not what WDS, or 802.11s is (I’m not arguing, I am simply unaware, and I would appreciate correction!)? I’ve tried setting this up a number of ways – all to no avail. I haven’t been able to identify exactly where the problem lies in the setup, as I am not knowledgeable enough about network administration yet. The Archer C7 is able to connect to the AX73 just fine, but any device connected to the Archer C7 is unable to reach the AX73. Would you be able to provide me with any instructions, or recommendations for guides to set up what you are describing? I’m missing some important set up step, or I’m improperly configuring something.
If Ethernet between the 2 is viable, go with that instead
I would like to try and set it up over a wireless link.
Removed by mod
deleted by creator
Are they running openWRT?
The tp-link Archer AX73 doesn’t support OpenWRT, but the second router (tp-link Archer C7) does, and has it installed.
Well with openwrt you can create a backplane network and then a 802.11r network on top of that. I don’t know if this is possible to do without them both running openwrt.
If compatible, i recommand OpenWRT
Aside from the fact that hte AX73 isn’t supported by OpenWRT, what steps would you suggest if one were to flash OpenWRT to accomplish this?
