Please explain?! Is GrapheneOS a honeypot in your opinion?

Wordle 1,655 4/6

⬛🟩⬛⬛🟨

⬛🟩🟨🟩⬛

🟨🟨⬛⬛🟨

🟩🟩🟩🟩🟩

Oh my what a ride! I got everything up and running in a RAIDZ2 with the 6 x 4TB drives! (soon i will add another 4 x 1tb in an icy dock as a separate vdev)

Everything works now with no errors! 🥳

I could not have fixed this without your help. You are a lifesaver and probably saved this drive from the landfill lol. I honestly can’t thank you enough for your continuous support throughout many days!

You are the light that shows that there are still good people on the internet that want to help, and not just lurkers that laugh and move on and treat everything as content instead of a person on the other side sharing something that is important to them.

In my case I was in need of help, and like one comment put it: Out of the 50 messages of ridicule, one person will actually go out of their way and help.

I learned soo much and a good lesson too!

Thanks again for your help, and I will remember this interaction for the rest of my self-hosting journey! I’m serious.

Keep helping others and sharing your knowledge. I will pay this kind gesture forward in the new year, and help others more with the things that I know. 🫡

(Please don’t delete this convo, might help someone in the future)

Thanks again and Happy Holidays!

I wish you all the best in the New Year! 🤗 🎉

Great News!

Format completed and now the drive is viewable in “Disks” (however it is still unknown compared to the other one, it might just need a normal format.

The code for the comparison returns invalid option, I assumed you need just -l comparison:

sudo sg_readcap -l /dev/sdb and sudo sg_readcap -l /dev/sda

One question I have is: what do you mean by powercycle? Is that another command to run on the problematic drive? If you mean turn off the pc and turn it back on, I will do that right now, just after the drive has completed formatting.

After PowerCycle (turned pc off and on)

sudo sg_readcap -l /dev/sdb and sudo sg_readcap -l /dev/sda

Would the next step be formatting of some kind?

Thanks for the continued support! ❤

I’ve attached an identical Segate SAS drive from the server.

To confirm, it is the same LSI card that was in the TrueNAS server. I pulled it out of the server and put it into the trouble shooting machine, where I run the commands.

It is this one: 01:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI SAS2308 PCI-Express Fusion-MPT SAS-2 [1000:0087] (rev 05)

I did not see your other reply lol, I will also try this command that you recommended:

sudo sg_format –format –size=512 –fmtpinfo=0 –pfu=0 /dev/sdb

Also, the sg_format ran for less than 5 minutes, very quick. However, if I can recall, it did say it was completed.

**Note: ** “Bricked Drive” turned to sdb

Identical working drive installed as sda

Here is the dmesg -T > dmesg-full.txt with the identical drive

Here is the code from: (with the output for each drive, separately)

sudo lspci -nnkvv

sudo lsblk -o NAME,MODEL,SIZE,PHY-SeC,LOG-SeC,ROTA

sudo fdisk -l /dev/sdX

sudo sg_inq -vv /dev/sdX

sudo sg_readcap -ll /dev/sdX

sudo sg_modes -a /dev/sdX

sudo sg_vpd -a /dev/sdX

Thanks again for all the help, I await your reply. :)

I will let you know the results of (sudo sg_format –format –size=512 –fmtpinfo=0 –pfu=0 /dev/sdb), as soon as it’s done.

Rise of the small web

Thanks for the reply,

It is an LSI card, the same one that was in my truenas server.

This one bought here

Edit: also the command that bricked the drive was me using sg_format with --size==512

Is that the same formatting solution you were mentioning ? Is it different?

Thanks for the uplifting words

I’ve connected to drive to another PC running Linux Mint 22, and the disks app can see the drive but no actions can be done on it. And Gparted can’t even read it lol.

Any ideas?

Thank you for helping! Like I said I’m a complete beginner with little knowledge of all this, means a lot 🤗

just so you know I connected the drive to my dell pc, so its just the one broken drive not all 6.

Exact drive model: SEAGATE ST4000NM0023 XMGG

HBA model and firmware: lspci | grep -i raid 00:17.0 RAID bus controller: Intel Corporation SATA Controller [RAID mode] Its an LSI card Bought it here

Kernel version / distro: I was using Truenas when I formatted it. Now trouble shooting on other PC got (6.8.0-38-generic), Linux Mint 22

Whether the controller supports DIF/DIX (T10 PI): output of lspci -vv

Whether other identical drives still work in the same slot/cable: yes all the other 5 drives worked when i set up a RAIDZ2 and a couple of them are exact same model of HDD

COMMANDS This is what I got for each command: verbatim output from

Edit: from LM22, output of sudo sg_format -vv /dev/sda

I really appreciate your knowledge and help 🙂
Let me know if anything else is needed

Voyager peak💪💪💪

Something like this ?

Self driving cars

Clamp your hams

Why is brave bad, other than the crypto in the browser and link redirects?

What are memecoins then?

there is this app that I found on fdroid that makes it pretty easy to log notes and photos on a daily calendar.

It certainly does not replace ANY of the other methods of documentation like videos and quality photos, and long detailed journal entries.

I just use it because it reminds me of the Snapchat Memories feature but FOSS.

It is a good starting spot, and makes it easy to document with photos.

It has been pretty good to me so far, I recommend that you give it a shot:

Can be found here: https://f-droid.org/packages/com.demizo.daily_you/

Github: https://github.com/Demizo/Daily_You

Looks like this

Hey, I’m trying to be more proficient in my Russian.

I think that the more letters a language has, the more words it has, and the more ways you have of getting you message across. The Russian language has so much depth to it due to the many ways of saying the same thing. This can be heard through Russian music or read through Russian literature. The more words a language has, the better you can describe what you are feeling. Maybe there is a better language for translating the complexity of our minds into primal/basic words that we have created.

Now, I might me a bit further in my learning that you are, but if anyone is interested

I have just started a Russian Learning Community that I hope to grow in the coming months.

Beginners, intermediate or advanced / fluent speakers of the Russian language

All are welcome! Не стесняйтесь ребята!

• Feel free to join and create discussions and posts.

• Share insights, resources and lessons

• Participate in comments

• Spark conversations by adding questions at the end of your post

We have a rule of trying not to use translators, only dictionaries and being fine with posting a post that is grammatically incorrect and having others point out your current flaws and room for improvement.

It can be found at: RushB@lemmy.zip (pun intended)

Найти нашу группу можно по етой ссылке: RushB@lemmy.zip

or here https://lemmy.zip/c/RushB

When joining, please introduce yourself in the welcoming post

EVERYONE IS WELCOME!

Приглашаю Всех!

It is currently very dry, so consider yourself an OG and use that title when it gets more popular.

This sounds like a perfect opportunity to start reading books.

Society changes Book is book

Media changes Book is book

Trends change Book is book

Government changes Book is book

Games get outdated Book is book

Servers get shutdown Book is book

Book will always be there in its original format, no ads, no change, no tracking, no brainrot, no trends, no algorithmic content creation.

Book is book

So are you saying these plugs will work on SATA drives?

Guess I’m staying with battery hungry signal…

Graphene won’t let me give it access to sms

I will try simplex, and see if it drains battery less. As of bow they seem to be tied for battery drain.